This is an old revision of the document!
Table of Contents
Introduction
TrackReader/Android is a simple application which allows a user to connect to tracking modules such as the QStar 1000 or the venerable G-Ray. The application allows the user to connect to, configure, and download tracks from the GPS modules.
Protocol reference: QStar GPS Tracker
Story 1
A job site is using QStart (or perhaps G-Ray) tracker devices attached to the various machine. At the end of each day, or perhaps a couple of times a day, a site supervisor needs to download the tracks from the trackers for analysis. The supervisor will use an Android device to sequentially connect, via Bluetooth, to each tracker, download the tracks and then move on to the next tracker.
The supervisor has the option to download tracks to either the Android device, or download and then upload them to the Access server. Uploading will send the files to the “Tracks” directory of the selected project.
Later in the office, a desktop user can use AgtekAccess client to download the files so they can be read into TrackWorks.
To be specified: What mechanism would be used to upload the tracks as if they are SimpleTrack trackers.
NOTE: This program is NOT a licensed product.
Story 2
- Support G-Ray with same features.
