AGTEK R & D Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
{{smartseticono.png|}}

 ====== Overview ======

Graphical Program Flow Chart [[https://agtek.s3.amazonaws.com/Agtek/qb6fjJapFOw7]]

==== Modes ====
RTK uses modes to accomplish specific tasks. The four modes are: 
  * Grade - compares shot values to an underlying surface to show remaining cut/fill or collect topographical data.
  * Stake - finds individual points (usually as part of a line) and displays info relative to the selected point.
  * Survey - this might as well be called new survey. It's very similar to Grade mode but avoids the alignment to the site. This is used when no file exists but the user needs to topo an area. The alignment is arbitrarily created but no benchmarks displayed.
  * Measure - used to document stockpiles most commonly. It's the one mode where we create volumes. While some of functionality is very similar to Grade mode with elements of Survey mode, the order of the data topo is critical for volumes. 





==== Startup Flow ====
I'd like SmartSet and SmartDirt to be as close as possible in flow knowing that there will be necessary deviations.


=== Common ===

  - Login
  - Pick Job File (local or agtek access), (option add a New to the menu in Job File view)
  - Pick a mode (grade or stake if job is selected) (new survey or measure from Job File menu)

=== Grade & Stake ===

  - Pick Alignment method (Shoot or Recover). (do we use the time after picking the job file to quickly read benchmark and recover info while doing the calculations in the background? Seems like a good opportunity to do a lot of the calculation in the background while the user doesn't need much horsepower.
  - Open selected mode 

=== Survey ===


=== Measure ===



=== Unique Features ===
This is for items which are especially unique to RTK.

A floating semi-transparent shoot button on screen. Taking a shot is probably the single most common thing we do in RTK. On the PPC platform we have a dedicated button on the device. We lack that on Android. We may even want to make this moveable to 4 different positions on each edge. Posssible interface is hold and drag, similar to adding a shortcut to the android main screens.

Voice activation





===== Story 1 =====

  * Build framework of modes
  * Create variety of Menus (there are lots depending upon the current mode)
  * Login
  * Checkout Key
  * Show and select files
  * Prompt for Grade or Stake Mode
  * Show job data in Grade or Stake Mode and get views laid out.








===== Story 2 =====

  * Integrate RTK Driver
  * Add Alignment to flow, align to Job
       * Add Recover from file to alignment quickly
       * Save alignment to file (add Save capability)
  * Show position overlaid on job & movement.


===== Story 3 =====

  * Make Grade values come alive comparing to RTK Shots
  * 

===== Story 4 =====
Completion

  * Rod Height/Monument functionality
  * Labeling
  * Creating Benchmarks




==== Staking ====

{{rtkstake.png?120x200|}}{{rtkstakezoom.png?120x200|}}{{rtkstakemenu.png?120x200|}}{{rtkstakemoremenu.png?120x200|}}

Stake Mode zoomed out, Stake Mode autozoomed in, Stake mode menu, Stake Mode More menu

==== Grade ====

{{rtkgrade.png?120x200|}}{{rtkgrademenu.png?120x200|}}{{rtkgradelmenu.png?200x120|}}

Grade Mode, Grade Mode Menu Portrait, and Landscape


{{surfaceselection.png?120x200|}}

List that displays when surface is tapped at bottom left of the screen.

==== New Survey ====

{{rtknewsurvey.png?120x200|}}

==== File ====


{{filemenuV2.png?120x200|}}

Menu for File view


==== Alignment ====

{{alignchoicesv2.png?120x200|}}{{alignchoicesmenu.png?120x200|}}{{alignment1.png?120x200|}}{{alignment2.png?120x200|}}{{alignmentreport.png?120x200|}}{{alignmentreshoot.png?120x200|}}{{choosemode.png?120x200|}}

Choosing the Alignment type - After picking a file, the Alignment type window displays. Shoot benchmarks shows the file and prompts for shooting of the benchmarks. Recover is only available if recover data is available in the file. Menu options are available for:

  * Create Benchmarks - allows the user to type in the coordinates of known benchmarks into the file and then shoot them.

  * Importing Recover - Displays a file dialog showing ADF files and .AGT files for selection. Supports AGTEK Access download as well. Upon file selection, the file is opened and the recover data and any nonmatching benchmarks are extracted. (Duplicates to benchmarks in the current file should not be imported, just their recover data.)

The program prompts the user to pick Benchmark 1, occupy the point and shoot. Only benchmarks are selectable in this mode. The Shoot button samples GPS points to the specified number (configured in Settings-GPS) and does the average of shots excluding those outside a standard deviation to establish the location of Benchmark 1.

At this point the program prompts the user to pick benchmark 2 and shows the assumed location of the GPS rover onscreen in relation to the job file. This is an assumed position because we have to assume rotation at this point and that the job file itself is oriented north. The distance at the screen bottom displays distance between the GPS rover (arrow) and the selected benchmark. 

After shooting the second benchmark, the Alignment Deviation report displays the difference between the GPS shot locations and the plan locations. Pressing Accept prompts for the mode to display (grade or stake) while pressing Reshoot takes the user back to the Alignment screens. If possible, it would be ideal if the menu also displayed giving the user a choice of reshooting the first benchmark or the last benchmark. This process can be repeated until the desired alignment deviation is accepted. 

Upon accepting the deviation, the user is prompted to choose a mode (grade or stake). The mode button selected changes the view to that mode.

Note: Cut/fill color is not being show on the graphics because my assumption is that we're doing calculations in the background while doing the Alignment process. On a job the size of Airway I'd expect the cut/fill color to show up at some point during the process. I would like the program to not change the zoom value to home view when that happens and retain the current view.

==== Save ====
The Save dialog has multiple capabilities including Save, Save As, uploading to AGTEK Access and uploading just survey data to AGTEK Access.

{{rtksavewindow.png?120x200|}}

=== Window behaviors ===

The default behavior when a file is saved is to put up the filename in the filename text box and leave Save As unchecked.
AGTEK R & D Wiki

User Tools

Site Tools

Page Tools
